SEBEX – 200

Home / SEBEX – 200

Plasticising & Hydrogen Free Grout Admixture

Chloride content : Nil to BS: 5075
Compressive Strength: The plasticising action of SEBEX 200 allows reduction of the water/cement ratios of cementitious grouts whilst maintaining flow properties. This gives improvement in strength & long-term durability when cured under restraint.
Setting Times : SEBEX 200 does not significantly affect the setting times of cement based grouts.
Expansion Characteristics : The controlled positive expansion in unset grouts incorporating SEBEX 200 overcomes plastic settlement when measured in accordance with ASTM C827. An unrestrained expansion of up to 4% is typical.
Time for expansion : 15 minutes 2 hours. Temperatures above 200 may slightly reduce these times.
Compatibility : SEBEX 200 is compatible with all types of Portland cement. SEBEX 200 may be used in mixes containing certain other admixtures. Consult customer care for further information.

SEBEX 200 is an hydrogen free grouting admixture where a reduced water / cement ratio and positive expansion are required. Applications include bed grouting, duct grouting, non-shrink in filling and jointing.

Gaseous expansion system compensates for plastic shrinkage and settlement improperly designed cementitious grout. Reduced water/cement ratio mixes in the grout mix ensures low permeability and long-term durability in service. Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy. No metallic iron content to corrode & cause staining of deterioration due to rust expansion in the grout. Composition allows high early strength development in grouts, without the use of chlorides.

SEBEX 200 a plasticized expanding grout admixture is supplied as a powder admixture. The material is a combination of a plasticizing agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counter acts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.

Properties
Chloride content : Nil to BS: 5075
Compressive Strength: The plasticising action of SEBEX 200 allows reduction of the water/cement ratios of cementitious grouts whilst maintaining flow properties. This gives improvement in strength & long-term durability when cured under restraint.
Setting Times : SEBEX 200 does not significantly affect the setting times of cement based grouts.
Expansion Characteristics : The controlled positive expansion in unset grouts incorporating SEBEX 200 overcomes plastic settlement when measured in accordance with ASTM C827. An unrestrained expansion of up to 4% is typical.
Time for expansion : 15 minutes 2 hours. Temperatures above 200 may slightly reduce these times.
Compatibility : SEBEX 200 is compatible with all types of Portland cement. SEBEX 200 may be used in mixes containing certain other admixtures. Consult customer care for further information.
General

SEBEX 200 is an hydrogen free grouting admixture where a reduced water / cement ratio and positive expansion are required. Applications include bed grouting, duct grouting, non-shrink in filling and jointing.

Advantages

Gaseous expansion system compensates for plastic shrinkage and settlement improperly designed cementitious grout. Reduced water/cement ratio mixes in the grout mix ensures low permeability and long-term durability in service. Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy. No metallic iron content to corrode & cause staining of deterioration due to rust expansion in the grout. Composition allows high early strength development in grouts, without the use of chlorides.

Description

SEBEX 200 a plasticized expanding grout admixture is supplied as a powder admixture. The material is a combination of a plasticizing agent allows the use of a reduced water/cement ratio with consequent increased strengths and durability. The expansive medium counter acts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.

Performance Specification

All grouting (specify details and areas of application) must be carried out with a cement based grout incorporating a must be iron-free and chloride-free and shall be added to the grout in the proportion of 225g of admixture per 50kg of cement. The admixture shall provide an expansion of up to 4% in the plastic grout, by means of a gaseous system. The admixture must be stored, handled and mixed strictly in accordance with the manufacturer’s instructions.

SSTP offers a comprehensive range of high performance, high quality concrete repair, and construction products. In addition, SSTP offers technical support service to specifiers, end-users and contractors, as well as on site technical assistance in location all over the country.

SEBEX 200 is a suitable pre stressing grout admixture complying with BS: 8110 part 1-1985, section 8.9.4.6.

Performance Specification : All grouting (specify details and areas of application) must be carried out with a cement based grout incorporating a must be iron-free and chloride-free and shall be added to the grout in the proportion of 225g of admixture per 50kg of cement. The admixture shall provide an expansion of up to 4% in the plastic grout, by means of a gaseous system. The admixture must be stored, handled and mixed strictly in accordance with the manufacturer’s instructions.

Supplier Specification : All grouting (specify details & areas of application) must be carried out using a cement-based grout, incorporating SEBEX 200 manufactured by us and applied strictly in accordance with the given technical datasheet.

Kept in a dry store in its original packing. High temperature & humidity storage may reduce this period.

SEBEX 200 is of low hazard. SEBEX 200 is of low hazard.
Contact with the skin and eyes, or inhalation of dust should be avoided. Suitable protective clothing, gloves eye/face protection and dust mask should be worn. Any contact with skin, should be washed with clean water. In case of contact with eyes, should be rinsed immediately with plenty of water & sought medical attention.

As per ISO-9001

Techincal Support

SSTP offers a comprehensive range of high performance, high quality concrete repair, and construction products. In addition, SSTP offers technical support service to specifiers, end-users and contractors, as well as on site technical assistance in location all over the country.

Standard Compliance

SEBEX 200 is a suitable pre stressing grout admixture complying with BS: 8110 part 1-1985, section 8.9.4.6.

Specification

Performance Specification : All grouting (specify details and areas of application) must be carried out with a cement based grout incorporating a must be iron-free and chloride-free and shall be added to the grout in the proportion of 225g of admixture per 50kg of cement. The admixture shall provide an expansion of up to 4% in the plastic grout, by means of a gaseous system. The admixture must be stored, handled and mixed strictly in accordance with the manufacturer’s instructions.

Supplier Specification : All grouting (specify details & areas of application) must be carried out using a cement-based grout, incorporating SEBEX 200 manufactured by us and applied strictly in accordance with the given technical datasheet.

Storage

Kept in a dry store in its original packing. High temperature & humidity storage may reduce this period.

Precautions

SEBEX 200 is of low hazard. SEBEX 200 is of low hazard.
Contact with the skin and eyes, or inhalation of dust should be avoided. Suitable protective clothing, gloves eye/face protection and dust mask should be worn. Any contact with skin, should be washed with clean water. In case of contact with eyes, should be rinsed immediately with plenty of water & sought medical attention.

Quality Assurance

As per ISO-9001

WE OFFER MORE POSSIBILITIES

TO MEET YOUR EVERY NEED

What Clients Say