KAVASSU INSTANT ROAD PATCH FILLER

Home / KAVASSU INSTANT ROAD PATCH FILLER

Readymix Pot Hole Filler With GTX Technology

Shalimar’s Kavassu road patch filler is ahead in quality and it is specially designed for Indian roads. SHALIMAR’S KAVASSU INSTANT ROAD PATCH FILLER in the form of microscopic particles with aggregates, which acts as suspending medium.
SHALIMAR’SKAVASSU INSTANT ROAD PATCH FILLER are fluid to be applied at atmospheric temperatures without heating and their viscosities are not materially affected by changes of temperature unlike hot applied binders, they become tough immediately after application.
It is necessary for SHALIMAR ‘S KAVASSU ROADPATCH FILLER to remain fluid long enough to be spread, it is desirable that the traffic should be kept off the work for half hour after rolling or at least until it is clear that the compound aggregates dried .If it is not possible to close the traffic, then a temporary speed limit of 16-20 km per hour is desirable until the surface dries. This compound aggregates separates into its component parts very shortly after spreading on the road surface, covering the aggregate and leaving a coating of pure bitumen, which cannot be disturbed even by immediate showers of rain.

• Road surfacing
• Repairs to pot holes/patch
• Surface dressing
• In level crossing of rails, platforms etc.
• Premix carpeting
• Runway repair.

1. They are applied cold: The various difficulties experienced in heating the material to the correct temperature are avoided. The possibility of destroying valuable properties by overheating is also avoided.
2. Require no bitumen Boilers or Special Plant: The cost of field operation in road works is considerably reduced because all that is necessary is the pouring cans or spray pumps. For small works or Patch repairs even a Mixer is not require, because it is completely readily mixed aggregates ready to use.
3. SHALIMAR INSTANT ROAD PATCH FILLER can be used with wet surface and work can be carried out during the monsson period as long as the rain is not heavy enough to wash away the film of SHALIMAR INSTANT ROAD PATCH FILLER.
4. SHALIMAR INSTANT ROAD PATCH FILLER is non –toxic and will not harm the fish or plant life.

As per ISO-9001

The surface or pothole to be repaired must be swept clean of all dust & loose material by air compressor. If dust is more & cannot be cleaned the it required a little primer (Bitumen Base) should be brushed over the area to be patched.
SHALIMAR’S KAVASSU INSTANT ROAD PATCH FILLER should then spread the premix evenly with rakes, Forks, or Shovels to the desired thickness & contour allowing for consolidation. After the premix has been compacted with the help of wooden rammer or stone rammer. It should be opened to traffic after half an hour or when the premix has definitely set hard.

50 KG HDPE Bags

Description

Shalimar’s Kavassu road patch filler is ahead in quality and it is specially designed for Indian roads. SHALIMAR’S KAVASSU INSTANT ROAD PATCH FILLER in the form of microscopic particles with aggregates, which acts as suspending medium.
SHALIMAR’SKAVASSU INSTANT ROAD PATCH FILLER are fluid to be applied at atmospheric temperatures without heating and their viscosities are not materially affected by changes of temperature unlike hot applied binders, they become tough immediately after application.
It is necessary for SHALIMAR ‘S KAVASSU ROADPATCH FILLER to remain fluid long enough to be spread, it is desirable that the traffic should be kept off the work for half hour after rolling or at least until it is clear that the compound aggregates dried .If it is not possible to close the traffic, then a temporary speed limit of 16-20 km per hour is desirable until the surface dries. This compound aggregates separates into its component parts very shortly after spreading on the road surface, covering the aggregate and leaving a coating of pure bitumen, which cannot be disturbed even by immediate showers of rain.

Specific Uses

• Road surfacing
• Repairs to pot holes/patch
• Surface dressing
• In level crossing of rails, platforms etc.
• Premix carpeting
• Runway repair.

Advantages

1. They are applied cold: The various difficulties experienced in heating the material to the correct temperature are avoided. The possibility of destroying valuable properties by overheating is also avoided.
2. Require no bitumen Boilers or Special Plant: The cost of field operation in road works is considerably reduced because all that is necessary is the pouring cans or spray pumps. For small works or Patch repairs even a Mixer is not require, because it is completely readily mixed aggregates ready to use.
3. SHALIMAR INSTANT ROAD PATCH FILLER can be used with wet surface and work can be carried out during the monsson period as long as the rain is not heavy enough to wash away the film of SHALIMAR INSTANT ROAD PATCH FILLER.
4. SHALIMAR INSTANT ROAD PATCH FILLER is non –toxic and will not harm the fish or plant life.

Quality Assurance

As per ISO-9001

Method Of Application

The surface or pothole to be repaired must be swept clean of all dust & loose material by air compressor. If dust is more & cannot be cleaned the it required a little primer (Bitumen Base) should be brushed over the area to be patched.
SHALIMAR’S KAVASSU INSTANT ROAD PATCH FILLER should then spread the premix evenly with rakes, Forks, or Shovels to the desired thickness & contour allowing for consolidation. After the premix has been compacted with the help of wooden rammer or stone rammer. It should be opened to traffic after half an hour or when the premix has definitely set hard.

Packing

50 KG HDPE Bags

National Award Winner

WE OFFER MORE POSSIBILITIES

TO MEET YOUR EVERY NEED

What Clients Say