KAVASSU G-50(L)

Home / KAVASSU G-50(L)

SHALIMAR G-50 (L) is integral waterproofing for concrete with good plasticizing properties. It does not contain any chloride and can also be used as an admixture for pre-stressed concrete. The admixture of SHALIMAR G-50 (L) in the concrete brings about contraction of capillaries thereby rendering the concrete dense and waterproof. SHALIMAR G-50 (L) is suitable for usage in production of waterproof concrete in a accordance with DIN 1048 (German industrial standard no.1048)and similar relevant standards.It conforms with IS: 2645 2003

Addition of SHALIMAR G-50 (L) in the concrete mix allows the reduction of about 15% mixing water without altering the workability of the mix. This property of SHALIMAR G-50 (L) makes it possible to control and maintain the water cement ratios as low as possible, which is of considerable importance in the preparation of watertight concrete.

SHALIMAR G-50 (L) brings about contraction of capillary pores & increases density of concrete rendering the concrete optimally watertight. The addition of SHALIMAR G-50 (L) in the concrete result in formation of homogeneous & evenly distribute cement binder which efficients binding of aggregates. The homogeneous cement gel prevents the likely settlement of heavy coarse aggregates and checks the phenomenon of bleeding in fresh concrete.

SHALIMAR G-50 (L) brings about contraction of capillary pores and increases density of concrete rendering the concrete optimally watertight.The results of the laboratory tests carried out in accordance with DIN 1048C(German industrial standard No.1048) for the testing of waterproof concretes reveal that the depth of penetration of water (washer indringtiete) was considerably lowered by admixing of SHALIMAR G-50 (L).

SHALIMAR G-50 (L) should be used for the preparation of watertight concretes employed in the construction of water retaining structures, sanitary rooms, constructions, in humid atmospheric conditions, concrete roofs, basements, tunnels, tanks, swimming pools etc.

SHALIMAR G-50 (L) should be mixed with gauging water or can be added to concrete during the process of mixing. Mixing should be continued for atleast one minute after the addition of SHALIMAR G-50 (L). The gauging water should be properly adjusted taking into account the water reduction brought about due to the presence of SHALIMAR G-50 (L).

Type of admixture: waterproofing compound
Form : liquid
Dosage : 200 ml. per Bag of Cement.
Packaging : 200 ml.,1,5, 20 & 200 Liters.
Storage : In original sealed containers protected from sunlight & frost.

One year from month of manufacturing.
QUALITY ASSURANCE : As per ISO-9001

General

SHALIMAR G-50 (L) is integral waterproofing for concrete with good plasticizing properties. It does not contain any chloride and can also be used as an admixture for pre-stressed concrete. The admixture of SHALIMAR G-50 (L) in the concrete brings about contraction of capillaries thereby rendering the concrete dense and waterproof. SHALIMAR G-50 (L) is suitable for usage in production of waterproof concrete in a accordance with DIN 1048 (German industrial standard no.1048)and similar relevant standards.It conforms with IS: 2645 2003

Application

Addition of SHALIMAR G-50 (L) in the concrete mix allows the reduction of about 15% mixing water without altering the workability of the mix. This property of SHALIMAR G-50 (L) makes it possible to control and maintain the water cement ratios as low as possible, which is of considerable importance in the preparation of watertight concrete.

SHALIMAR G-50 (L) brings about contraction of capillary pores & increases density of concrete rendering the concrete optimally watertight. The addition of SHALIMAR G-50 (L) in the concrete result in formation of homogeneous & evenly distribute cement binder which efficients binding of aggregates. The homogeneous cement gel prevents the likely settlement of heavy coarse aggregates and checks the phenomenon of bleeding in fresh concrete.

SHALIMAR G-50 (L) brings about contraction of capillary pores and increases density of concrete rendering the concrete optimally watertight.The results of the laboratory tests carried out in accordance with DIN 1048C(German industrial standard No.1048) for the testing of waterproof concretes reveal that the depth of penetration of water (washer indringtiete) was considerably lowered by admixing of SHALIMAR G-50 (L).

Fields Of Application

SHALIMAR G-50 (L) should be used for the preparation of watertight concretes employed in the construction of water retaining structures, sanitary rooms, constructions, in humid atmospheric conditions, concrete roofs, basements, tunnels, tanks, swimming pools etc.

Instruction For Use

SHALIMAR G-50 (L) should be mixed with gauging water or can be added to concrete during the process of mixing. Mixing should be continued for atleast one minute after the addition of SHALIMAR G-50 (L). The gauging water should be properly adjusted taking into account the water reduction brought about due to the presence of SHALIMAR G-50 (L).

Technical Data

Type of admixture: waterproofing compound
Form : liquid
Dosage : 200 ml. per Bag of Cement.
Packaging : 200 ml.,1,5, 20 & 200 Liters.
Storage : In original sealed containers protected from sunlight & frost.

Shelf Life

One year from month of manufacturing.
QUALITY ASSURANCE : As per ISO-9001

WE OFFER MORE POSSIBILITIES

TO MEET YOUR EVERY NEED

What Clients Say