PROFILE | PRODUCTS | NEWS ROOM | CREDENTIAL    
 

Product  

WATERPROOFING CEMENTITOUS & ACRYLIC COATINGS
PRODUCT DESCRIPTION APPLICATION AREA METHOD OF APPLICATION
SHALICRETE-151
(1,5, 20 Kg.)
Acrylic based polymer modified Cementitous composite coating. Polymer in conjunction with cement improves its poor adhesion properties, low impact strength, low flexural strength and thin section fragility. Protection of concrete against corrosion, salt attack etc. Water curing for 48 hours is must after final coating. Finally a protection layer of plaster/ brick Coba/ mud phaska/ brick tiles/ PCC is required to be laid over the treatment.   Waterproofing of basements, toilets, terraces, roofs, swimming pools, and water tower etc. general concrete repairs. SURFACE PREPARATION: The surface shall be cleaned thoroughly. All concrete surfaces shall be thoroughly pre-wetted for at least one hour prior to the application of SHALICRETE-151 coating. There shouldn't be standing water or shiny wet surface. Depressions are filled and leveled using filler ratio 1 Kg cement: 1.5 by SHALIMAR PURE SILICA GRAINS (SPSG) & 0.52 Kg SHALICRETE-151. After surface preparation, 1st layer of slurry of cement @ 0.488 kg/sqm mixed with SHALICRETE - 151 @ 0.253 kg/sqm. Laying 2nd layer of SHALINET (Fiber Cloth) when the 1st layer is still green. Overlaps of joints should not be less than 10 cm. 3rd layer of 1.5 mm thickness consisting of slurry of cement @ 1.3 kg/m2 mixed with SHALICRETE- 151 @ 0.670 kg/Sqm & (SPSG) @ 1.289kg/sqm. This will be allowed to air cure for 4 hours.
SHALICRETE-500
(1,5, 20 Kg.) 		It is saponification resistant plastic copolymer dispersion & heavy-duty acrylic based polymer modified Cementitous composite coating. SHALICRETE-500 is having more solids acrylic contents for excellent results in comparison to other product of the same kind. Polymer in conjunction with cement improves its poor adhesion properties, low impact strength, low flexural strength and thin section fragility. Protection of concrete against corrosion, salt attack etc. For heavy duty waterproofing of basements, toilets, terraces, roofs, swimming pools, and water tower etc. general concrete repairs. SURFACE PREPARATION: The surface shall be cleaned thoroughly. All concrete surfaces shall be thoroughly pre-wetted for at least one hour prior to the application of SHALICRETE-500 coating. There shouldn't be standing water or shiny wet surface. Application procedure for SHALICRETE - 500 is same as procedure of SHALICRETE - 151. Water curing for 48 hours is must after final coating. Finally a protection layer of plaster/ brick Coba/ mud phaska/ brick tiles/ PCC is required to be laid over the treatment.
SHALITOP- XXX
(1,5, 20 Ltr.) 		SHALITOP- XXX is a single component, water thinnable coating specially formulated for internal & external applications. To be applied in old & new buildings, over sloping & flat roofs of RCC & PCC, sunken portions, basements, etc. After cleaning of the surface. Apply first coat immediately on affected areas. After drying of 1st coat 2nd repeat coat is to be applied.  Coverage: 10- 12 SqFt. / Per coat/ Liter .
SHALICRETE SUPER LATEX
 (1,5 & 20 Kg.) 		SHALICRETE SUPER LATEX is a single component, anti-damp, synthetic rubber emulsion, which can be added to any cementitous formulation, to achieve bonding and waterproofing properties. SHALICRETE SUPER LATEX is versatile product, which can be mixed with cement slurry, mortar, concrete or grout, as per recommended dosage in each case. Masons enjoy using it as an additive to repair mortars and renderings, to arrest rebound loss due to its thixotropic properties. An excellent remedy against rising dampness, salt-petre and damp walls, when used as a plaster additive SHALICRETE- SUPER LATEX is used for filling and repair of bridges and all types of concrete structures . FOR ROOF: In cement slurry for bond coat: dilute 1Ltr. SHALICRETE SUPER LATEX with 3 Ltr. of clean water. Pour 1 kg cement to this milky solution & keep mixing till it forms uniform slurry. This slurry will cover about 2.5 Sqm and it will form an excellent bond coat., on which an overcoat can be applied, (Plaster, Tile Work, Concreting) while the bond coat is tacky.
 SUNKUN PORTION: In cement slurry for bond coat: dilute 3 Ltr. SHALICRETE SUPER LATEX with 1.5 Ltr. of clean water. Pour 1 kg. Cement to this milky solution & application is same as noted above. JOINT CRACK FILLING: As a putty for joints: Mix 1 Part SHALICRETE SUPER LATEX, 1 Part clean water, 1 Part cement, 3 Part Sand (below 600 Microns) approx to form a mortar of putty consistency, for application in joints.		 FOR GROUTING:
 In Cementitous Grouts: SHALICRETE SUPER LATEX can be added to freshly prepared grouts and used either for pocket grouting, base plate grouting or for injection purposes.
 FOR INJECTION GROUTING:
mix 3 kg Latex per bag of cement, along-with other grouting admixtures (SHALIKRETE EHS) for baseplate and pocket grouting. Dilute SHALICRETE SUPER LATEX with gauging water in the ratio 1:8.
 FOR DPC SYSTEM:
In floors or as a damp proof course (DPC): SHALICRETE SUPER LATEX can be diluted with gauging water in the ratio 1:4 used to hydrate the flooring/DPC material. In marshy arrears slurry coat (1:4:10=Latex: Water: Cement) is recommended.
FOR 1Sqm. PLASTER WORK:
 To make a high abrasion resistance polymeric cement sand 15mm plaster dilute 220 grams of SHALICRETE SUPER LATEX to 1.76 Ltr. of water and mix required cement: with sand (1:4).
SHALIMAR WATER TIGHT TYPE A & B
 Type A
(50 Kg. Bag)
Type B
(5, 20 Liters.) 		SHALIMAR WATER TIGHT: TYPE - B Is a two Component acrylic polymer modified cementitous coating, which consists of PART A AND PART B acrylic emulsion. It can simply be applied by a stiff brush, or trowel to obtain the desired thickness. It consists of specially selected cements, graded hardwearing aggregates and additives supplied in power and TYPE - B liquid component of blended acrylic copolymers. The polymer provides SHALIMAR WATER TIGHT with exceptional adhesion, toughness and durability.

ADVANTAGES: Excellent adhesion, bonds to porous and nonporous surfaces. Non-toxic ideal for portable water tanks. Excellent for damp proofing basements & leaking brick and masonry walls. Breathable-allows transmission of water vapors from interior of building. Eliminates hand rubbing of concrete surfaces. Excellent for Good resistance to carbon dioxide & chloride ion diffusion.		 SHALIMAR WATER TIGHT TYPE-B Is designed to re-face and even out variations in concrete and masonry surfaces. Effectively protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and atmospheric gases. Provides a seamless, waterproof coating suitable for use in water tanks, reservoirs, fountains, roofs and sealing the bar holes to ensure water tightness. Effectively seals concrete masonry walls and bridge the shrinkage cracks, which are static. Provides a tough and durable coating, which cannot be easily damaged or worn away. Has excellent weather resistance properties and is suitable for exterior applications. Acts as a barrier against water leakages. For best results damp the surface before coating with SHALIMAR WATER TIGHT TYPE - B. Apply the mixed material using a short, stiff bristle brush preferably 100 to 150mm width like paint. Trowel applications can be undertaken as necessary using the correct mixing ratio to obtain satisfactory consistency. On hot substrates, i.e. over 40oC surface temperature, a primer coat of mixed SHALIMAR WATER TIGHT TYPE - B & water with slurry like consistency should be applied. Prime only areas that can be coated with SHALIMAR WATER TIGHT TYPE - B before the primer dries. Materials should not be applied at temperatures below 10oC. It is recommended that for general re-surfacing the total thickness of the applied material be 1 to 2 mm. Coverage: It depends on the required consistency. SHALIMAR WATER TIGHT TYPE -A is supplied as a package of 50kgs (Bag) of which 30 kg is mixed with SHALIMAR WATER TIGHT TYPE - B 5 Kg Jerry can, at even consistency (1 mm thickness) is as follows:
Consistency           Brush        Trowel
Coverage in m2     16-18        14-16
CALTEX DAMPOXY G 300
(20 Liters.) 		DAMPOXY G 300 is a two component, water thinnable Epoxy coating specially formulated for internal applications. Its tough and impermeable film makes it suitable to stop internal seepages from external walls & rising dampness. Its major advantage being that it can be applied, even on damp surfaces. For Damproofing seepages from rising dampness in external walls, sunken portion, basements, lift pits, water tanks, swimming pools etc.Can be used as Damproofing course at pre construction stage for underground structures. Apply first coat immediately on affected areas within 1 hour. Apply second coat within 3-4 hours to ensure proper intercoat adhesion. Allow to cure for minimum 24 hours before any further painting or treatment is started Coverage: 25 - 35 SqFt. / Per coat/Liter .
SHALIMAR PLUS
 (1,5, 20 Liters)
Shalimar Plus is saponification resistant plastic copolymer dispersion with extraordinarily favorable characteristics when used as polymer component in hydraulically setting mortars. By addition of Shalimar Plus mortar will be improved particularly in terms of the following characteristics: Strength of adhesion to the base is distinctly improved. This allows structural bonds between existing mortars/concretes and fresh mortar. The compressive and flexural strength is increased compared to the reference mix. Water absorption is reduced thus providing increased waterproofing properties. Shalimar Plus is particularly suitable for use in following applications. The production of structural leveling compounds and bonded screeds. The production of repair mortars. e.g. in the repair and filling of structural concrete in bridge building and civil engineering. For water proofing mortars for roofs basements etc. Cold joints between old and new concrete can be made strong and non permeable with a bonding slurry consisting of Shalimar Plus and cement mortar . The base must be clean and free from loose particles, dust grease oil or other remnants. Unsound areas should be removed until sound concrete is located. After cleaning of the surface apply first coat of Shalimar Plus with the help of paintbrush or rubber spreader immediately on affected areas within 1 hour. Apply second coat with the help of paintbrush or rubber spreader within 3-4 hours to ensure proper intercoat adhesion. Allow curing for minimum 12 hours before any further painting or treatment is started.  
SHALIFEX - 5000
(20 Liters) 		It is a versatile product, which can be mixed with cement slurry, mortar, concrete or grout, as per recommended dosage in each case. Masons enjoy using it as an additive to repair mortars and renderings, to arrest rebound loss due to its thixotropic properties. For Damproofing seepages from rising dampness in external walls, sunken portion, basements, lift pits, water tanks, swimming pools etc. Can be used as Damproofing course at pre construction stage for underground structures.   In cement slurry for bond coat: dilute 3 Ltr. SHALIFEX - 5000 with 1.5 Ltr. of clean water. Pour 1 kg. Cement to this milky solution and apply the solution over the surface uniformly.
SHALICRETE SBR EMULSION
 (1,5 & 20 Kg.) 		SHALICRETE SBR EMULSION is a single component, anti-damp, synthetic rubber emulsion, which can be added to any cementitous formulation, to achieve bonding and waterproofing properties. It is a versatile product, which can be mixed with cement slurry, mortar, concrete or grout, as per recommended dosage in each case. SHALICRETE SBR EMULSION Is designed to re-face & re-bond even out variations in concrete and masonry surfaces. Effectively protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and atmospheric gases. Provides a seamless, waterproof coating suitable for use in water tanks, reservoirs, fountains, roofs and sealing the bar holes to ensure water tightness. Acts as a barrier against water leakages. SHALICRETE SBR EMULSION will cover about 6-7 M2 per Ltr. to form an excellent bond coat., on which an overcoat can be applied.

CUSTOMER CARE SERVICE: +91-9829065184, 9829065284, 9810897384, 9810028937, 9314512969, 9414063757

Home | Contact US | Profile | Products | News Room | Credential